DOUG FLEENOR 6CH DMX RELAY PACK

182359.jpg
6re__38842.png
182359.jpg
6re__38842.png

DOUG FLEENOR 6CH DMX RELAY PACK

$0.00

Doug Fleenor Design makes a series of relay packs that are controlled by DMX512. This 6-channel unit, designed to switch line voltage loads up to 15 amps, uses 30 amp relays. Line voltage input is on two 18" 12/3 SJ pigtails (one for CH 1-3, one for CH 4-6) fitted with a 15 amp parallel blade plug (20 amp connector optional). Switched line outputs are on chassis mounted 15 amp parallel blade receptacles.

Doug Fleenor Designs DMX6REL30A Relay Pack Specifications:

  • Input signal: 250 Kilobaud, 0.2 volts minimum, 12volts maximum.

  • Input circuit: EIA-485 receiver with two 100 ohmPTC self resetting fuses, four low capacitance transient suppression diodes.

  • Input connector: Gold-plated 5-pin male (Neutrik D-1series).

  • Input pass through: Gold-plated 5-pin female (NeutrikD-1 series). All five pins are passed through.

  • Power input: 120 - 240 volts, 50/60 hertz, 2watts (plus load).

  • Power input plug: NEMA type 5-15P dead front plugstandard, others optional.

  • Power output: Input power is switched to output.

  • Power output socket: Nylon NEMA type 5-15R receptacle

  • Output rating: 15 amps per output. Maximum total loadis limited by input rating.

  • Output device: Aromat JTN.

  • Mechanical life: 10,000,000 operations minimum.

  • Electrical life: 300,000 operations minimum at 5 Amps.

    • 125,000 operations minimum at 20 Amps.

  • Color: Top, bottom and sides: Silver hammer tone.

  • Front and back: Black.

  • Dimensions: 6.5" D x 1.7" H x 16" W

  • Weight: 5 lbs

Quantity:
Add To Cart